ST-1100 Stable DFB Light Sources Multi-wavelength

Specifications：

ST-1100D series of Fiber Optic Sources

The 1100 series of Fiber Optic Sources are microproc- essor controlled laser diode sources, capable of providing up to 500 mW of power at user- specified wavelengths includ- ing WDM C-Band and L-Band wavelengths. Designed for component testing, power meter calibration, and general laboratory use. Plus, each 1100 comes equipped with a standard RS232 remote interface for easy incorporation into production automated test system or computer controlled laboratory test.

Features

       Provides 1~3 wavelength channels, any wavelength(s) can be optional

   High Stability and Reliability
   Stability: ±0.005 dB@15 min& ±0.05 dB@24 hour
   Accurate internal temperature control ensures the constant
   output wavelength and low bias.

   Output power can be adjustable, the range is among 5%~100%
   based on the maximum output power.
   ST-1100 adopts the digital adjustment of output power, to prevent
   the inconsistency bring from the potentiometers.

   Digital adjustment of laser emitter temperature
   ST-1100 supports the digital adjustment of laser emitter temperature,
   so that the user can do the slight adjustment for the wavelength when in necessary.

   Over temperature protection
   ST-1100 will cut off the laser emitter automatically and stop the work when the
   surrounding temperature over the limitation.

   Auto Fan Control
   ST-1100 can sensor the temperature through the internal transducer, and it will start
   once the temperature over the standard, this can increase the using life of the unit.

Specifications

TYPE	ST-1100
Operating Wavelength(nm)	850,980,1300,1310, 1480,1550, 1625 ect.	1310/1550,1310/1480, 1480/1550,980/1550 etc.	1310/1490/1550 or others
Optical Connector	FC/APC(Other type adapters can be cusomized)
-3dB Spectral Width(nm)	<0.1
-20dB Spectral Width(nm)	<0.5
Side mode suppression ratio(dB)	>35(DFB)
Maximum Output Power(mw)	≥1; ≥2; ≥5; ≥10 (others please specify)
Output power stability in 15 minutes(dB)	±0.005
Output power stabiltiy in 24 hours(dB)	±0.05
Digital Internal Modulation	1Hz~20KHz
Digital External Modulation	0Hz~20KHz
TEC stability	±0.01℃@15 minutes; ±0.05℃@ 24 hours
Power Supply	110V or 220V (50Hz~60Hz)
Operating Temperature	10~+50℃
Storage Temperature	-10~+60℃
Warm Up Time(hour)	0.5
Dimensions(mm)	280260120
Net Weight(kg)	4.7
Remark: All specifications stated here are depend on DFB laser, Specifications like emitter types, central wavelength, output power on demand.

MODEL	INCLUDES
ST-1100	ST-1100 High Stable Light Source, Power Supply Cord, Fuze, Instruction Manul and Cotton swabs.