Isolator Polarization Beam Combiner/Splitter

1x2 Isolator Polarization Beam Combiner/Splitter(IPBC/S)combine the functionality of a PBC/S and an isolator into one component.Benefits of such devices includes reduction of component space and cost within assemblies and less splices.PBC/S can be used either as a polarization beam combiner to combi

Specifications：

1x2 Isolator Polarization Beam Combiner/Splitter (IPBC/IPBS)


1x2 Isolator Polarization Beam Combiner/Splitter(IPBC/S)combine the functionality of a PBC/S and an isolator into one component.Benefits of such devices includes reduction of component space and cost within assemblies and less splices.PBC/S can be used either as a polarization beam combiner to combine light beams from two PM input fibers into a single output fiber, or as a polarization beam splitter to split light from an input fiber into two output fibers of orthogonal polarization states.It is widely used in EDFA, raman amplifier, fiber sensor, coherent, telecommunications systems. Polarization mode dispersion compensator.

Features

  • Low Insertion Loss
  • High Isolation
  • Low Wavelength and Temperature
  • High Return Loss
  • High Power Handling
  • Compact Size
  • Rugged Design
  • 1 M Jacketed Fiber on Each Leg
  • 1064, 1310, 1480, and 1550 nm Operating Wavelengths

    Mechanical Dimensions(mm)

    Applications

  • EDFA & Raman Amplifier
  • Fiber Sensor System
  • Coherent Telecommunication Systems
  • Polarization Mode Dispersion Compensator
  • Polarization Division Mux/Demux
  • Fiber Laser System
  • R&D Laboratories
  • Instruments

    Ordering Information



  • if you have any requirement for it.，Please contact us by email to sales@SunmaFiber.com


    Parameter Values
    IsolatorStage SingleStage DualStage
    CenterWavelength(nm) 1310、1480、1550
    OperatingWavelengthRange(nm) ±20
    Typ.InsertionLoss(dB) 0.45 0.55
    InsertionLoss(dB) ≤0.7 ≤0.8
    Typ. Isolation(dB) 35 51
    Isolation@23℃(dB) ≥20 ≥40
    ExtinctionRatio(dB)(OnlyforPBS) ≥20 ≥20
    Directivity(dB) ≥50
    Return Loss(dB) ≥50
    Power Handling(W) 500
    Fiber Type Port1&2 PM Panda Fiber
    Port3 SMF-28e or PMPandaFiber
    Operating Temperature(°C) -5~+70
    Storage Temperature(°C) -40 ~ +80
    Dimensions(mm) φ5.5×L35(P1)

    Note:
    *The above specification is without connector.
    *The PM fiber and the connector key are aligned to the slow axis.