ST-8831 Series Spectrum Analyzer is portable analyzer, and can be used anywhere in the cable network for analyzing RF signals with a comprehensive scope of measurements. From analysis of digitally modulated signals to test of distortion and noise parameters in the field, this spectrum analyzer is an
ST-8831 1GHz Spectrum Analyzer with CATV,DVB-C
ST-8831 Series Spectrum Analyzer is portable analyzer, and can be used anywhere in the cable network for analyzing RF signals with a comprehensive scope of measurements. From analysis of digitally modulated signals to test of distortion and noise parameters in the field, this spectrum analyzer is an industry workhorse. The analyzer is specifically focused on the cable TV industry with application specific test features as well. Cable operators typically use the analyzers in the headend and as a tool for elite (high tier) technicians to use for in-depth testing and troubleshooting. They are also used for FCC proof of performance tests. The ST-8831 Series meet the precise testing needs of the customer and are the greatest assistant
Model |
Description |
ST8831A |
Standard Spectrum Analyzer 50Ω |
ST8831B |
Spectrum Analyzer 75Ωwith CATV |
ST8831Q |
Spectrum Analyzer with CATV, DVB-C |
ST8831T |
Spectrum Analyzer with CATV, DVB-C, DTMB |
*Portable design with DSP technology
*QAM analysis, spectrum analysis and CATV analysis
*QAM analysis: MER, BER, EVM, Constellation Diagram
*Support ITU-TJ.83 Annex A/B/C
*CATV analysis: CSO/CTB, C/N, HUM, MOD, LEVEL, Cross-Modulation, Auto and Limit Test etc
*Video Analysis Function: Differential Phase/Gain, Chrominance-to-Luminance Delay Inequality and
*Powerful Spectrum Analysis
*6.4"color TFT LCD and USB, LAN Interface
*Tracking Generator(option)
*Battery and AC power supply |
Frequency | |
Range |
1MHz~1000MHz |
Reference Frequency Stability |
±1 x10-6/±1 x10-7(Option) |
Frequency Temperature Stability |
±2 x10-6(0~50)℃ |
Resolution |
10Hz |
Frequency Counter | |
Accuracy |
±1(S/N >25dB) |
Resolution |
1Hz |
Frequency Scan Width | |
Range |
0Hz(Zero Span),1KHz~1000MHz |
Sweep Time and Triggering Type | |
Sweep Time |
20mS~250S(Span ≥1KHz)
20 μS~250S(Span = 0Hz) |
Time Accuracy |
±0.2% |
Triggering Type |
Free Trigger、Single Trigger、Video Trigger、Line Trigger |
Resolution Bandwidth(RBW) | |
Range |
1KHz~3 MHz 1-3 Step and 30Hz、100Hz、300Hz (Option) |
Accuracy |
±10% |
selectivity |
(60dB/3dB Bandwidth Rate):< 5:1 |
Video Bandwidth(VBW) |
30Hz~1MHz(1-3 Step) |
Phase Noise |
< -120 dBc/Hz @ 100kHz offset(typical)
< -90 dBc/Hz @10 kHz offset(typical) |
Level Index | |
Attenuator | |
Range |
0dB - 55dB |
Step |
5dB |
Amplifier Inside | |
Frequency Range |
1MHz~1000MHz |
Gain |
20dB |
Noise Coefficient |
4dB(typical) |
Maximum input |
+20dBm (Peak Power/ Attenuation>15dB ) |
100V DC | |
TOI |
>+18dBm(Typical) |
Display Average Noise Level(No Signal Input,0dB Attenuation,30 kHz RBW, 100 Hz VBW, Sampling Demodulation) |
≤-98dBm, 1 MHz~1000MHz (Amplifier close)
≤-117dBm, 1 MHz~1000MHz (Amplifier open)
|
spurious signal Response Range |
-20dBm Single Audio Mixer Input and Amplifier Closed |
Second Harmonic |
<-65 dBc |
IMD |
<-70 dBc
-20dBm Dual Audio Mixer Input, Signals interval≥1MHz, Amplifier Closed |
Residual Response
(No Signal Input and Attenuation is 0) |
≤-93dBm 1MHz~1000MHz |
Display | |
Logarithm Scale |
0.1~0.9 dB/Scale,0.1dB step; 1~40dB/ Scale,1dB step |
linearity Scale |
10 Scale |
Scale Unit |
dBm, dBmV, dBμV, mV |
Marker Resolution |
Reference Level’s 0.03 dB ——Logarithm
Reference Level’s 0.03% —— Linearity |
Trace |
3 Traces Display |
Detector Type |
Sampling Value, Positive Peak Value, Negative Peak Value, Normal Value, Average Value |
Marker Function |
Peak Value, Next Peak Value, To Center, To Reference etc. |
Marker Display |
Normal, Delta, Fixed, Frequency Counting |
Reference Level Range |
-130 dBm~+40dBm |
Level Accuracy |
±1dB@+25±5℃(Typical) |
Resolution Bandwidth Switching Accuracy |
±0.1dB (Typical) |
Input Attenuator Switching Accuracy |
±0.3dB (Typical) |
CATV Index | |
Channel Mode |
Frequency, Channel |
Channel System |
Customized, NTSC, PAL |
Channel Amplitude Range |
20 dBμV~125 dBμV ±1.0 dB@+25±5℃ S/N> 30 dB |
TV Video Frequency | |
Accuracy |
Carrier Frequency×(±2 x10-6 )+10Hz |
Resolution |
1Hz |
V/A | |
Accuracy |
±100Hz |
Resolution |
1Hz |
V/A Ratio |
±1dB (S/N>30dB) |
Audio offset | |
Range |
100KHz |
Accuracy |
±2 KHz ≤80KHz
±3 KHz ≥80KHz and ≤100KHz |
HUM/Low Frequency Interference | |
Type |
CW or Video Signal(on-line) |
Range |
1%~20% |
Accuracy |
±0.5% (1%~5%);±1% (5%~20%) |
Modulation Depth | |
Modulation Depth |
40%~95% |
Resolution |
0.1% |
Accuracy |
±1.5%(S/N>40dB) |
Signal Type |
Use VITS line with white reference |
Carrier to Noise Ratio (C/N) | |
Best Measurement Range |
92dBμV~97dBμV 0dB Attenuation,Amplifier Close
72dBμV~77dBμV 0dB Attenuation,Amplifier Open |
Maximum C/N |
60dB ( ±1dB Accuracy)
65dB (±3dB Accuracy) |
Resolution |
0.1dB |
CTB/CSO | |
Best Measurement Range |
82dBμV~87 dBμV 0dB Attenuation,Amplifier Close
62dBμV~67 dBμV 0dB Attenuation,Amplifier Open |
Maximum CTB/CSO |
63dB (78 Channels±1.5dB Accuracy)
70dB (78 Channels±4.0dB Accuracy) |
Resolution |
0.1dB |
In-Channel Frequency Response | |
Range |
±12dB |
Accuracy |
±0.2dB |
Resolution |
0.1dB |
Differential Gain | |
Accuracy |
±2% |
Differential Phase | |
Accuracy |
±3° |
Chrominance to Luminance Delay Inequality | |
Accuracy |
±40ns |
Digital Index | |
Modulation Analysis | |
Type |
16/32/64/128/256QAM, QPSK ITU-T J.83 Annex A,B&C
DOCSIS, EuroDOCSIS |
Interweaver Capability |
Max 128 x 4 ( Annex B) ,Max12 x 17 (Annex A/C ) |
Constellation Diagram |
QPSK 16/32/64/128/256QAM, Zoom Function |
Equalizer |
Open/Close |
Channel Power | |
Range |
30BμV~120dBμV |
Resolution |
0.1 dB |
Accuracy |
Typical:±1.0 dB@(25± 5℃,C/N>20dB) |
Width Range |
200kHz~200MHz |
Modulation Error | |
MER |
22 dB ~ 40 dB(64/256QAM) |
Accuracy(MER) |
± 0.5 dB (22 ~ 30 dB)
± 1.0 dB (30 ~ 35 dB)
± 1.8 dB (35 ~ 40 dB) |
EVM) |
0.65% ~4.1% |
Pre-post BER(In 1 Second) |
2 x10-3~1 x10-9 |
BER Statistic |
1~4320/Minute |
Symbol Rate |
1~7 MS/s |
Inpu/Output Index | |
Front Panel | |
Calibration Output | |
Frequency |
150 MHz ± 2 x10-6 |
Amplitude |
-20dBm±0.5 dB @ +25℃ |
RF-Input | |
Input connector |
BNC or F |
Input Impedance |
75Ω(8831 B/Q) and 50Ω(8831 A/T) |
Stationary Wave Ratio |
Typical <1.5 (10MHz~1000MHz, Attenuator≥10dB) |
USB |
USB1.1 |
Back Panel | |
VGA Output |
Standard VGA Output |
Keyboard Port |
6pin |
ASI Output |
BNC |
Tracking Generator(Option) | |
Phase Noise |
<-80dBc/Hz@10KHz |
Amplitude Range |
0dBm~-60dBm |
Amplitude Accuracy |
±1.5dB |
Harmonic Distortion |
Typical≤-25dBc |
Non harmonic Distortion |
Typical≤-35dBc |
Output Impedance |
75Ω/ 50Ω |
VSWR |
≤2.0 |
Power Supply | |
Battery |
14.8V / 6Ah Chargeable Li-lon Battery |
Adapter |
19V /3.42A |
Charging Time |
Round 5 hours |
Battery Working Time |
>3 Hours
>2.5 Hours(With Tracking Generator ) |
Others | |
Work Temperature |
0°C~+40°C |
Storage Temperature |
-10°C~+50°C |
Dimension(Width X Height X length) |
360mm × 180mm × 350mm |
Net Weight(With Battery) |
Round 9 kg |
Display |
16cm (6.4 inches) TFT Colorful LCD |
Display Resolution |
640×480 Pixels |
Option | |
Tracking Generator |
1000MHz/3000MHz Tracking Signal Source |
Workbench |
PC management software |
Line Selection in CATV |
Video Analysis including Differential Phase, Differential Gain, Chrominance-to-Luminance Delay Inequality and Row Triggering function in Spectrum |
Narrowband RBW |
RBW to 300Hz、100H、30Hz; VBW to 1Hz |
Video output converter |
Converting the VGA signal to RCA and S-Video output |