ST-1129/1129Q Signal Level Meter
The instrument adopts the all-number display, the readings on the measuring instrument are clear and precise, and owing to the introduction of the micro processing unit, therefore, it makes its functions stronger, the precision higher, operation more flexible and convenient. The large screen figure monitor is very convenient to measure the main technical targets of CATV system. It has the functions such as the single-channel, multi-channel, all-band scanning, difference-carrying measurement, signal-to-noise ratio (SNR, S/N) measurement and spectrum analysis frequency analysis etc.
Signal Lever Meters correlation table |
Model No |
Constellation |
Main Parameter |
ST-110/110Q |
No |
Doulbe channel, A/V, C/N, Average Power, Trunk line Voltage, |
ST-128/128Q |
No |
Spectrum, Channel Power, Tilt , A/V, C/N, Average Power, Trunk line Voltage, |
ST-200/200Q |
No |
MER, BER, Tilt , A/V, C/N, Average Power, Trunk line Voltage, |
ST-1129/1129Q |
Yes |
Spectrum, MER, BER , Tilt , Channel Power, A/V, C/N, Average Power, Trunk line Voltage |
ST-1130/1130Q |
Yes |
Advanced spectrum, Full automatica scan , MER, BER , Tilt , V/A,C/N , Average Power ,Channel Power, Trunk line Voltage, Threshold, Alarms |
Technical Data
Model No |
ST-1129 |
ST-1129Q |
Digital DVB |
|
|
Frequency scope |
5~870MHz |
5~870MHz |
Modulation |
DVB-C/ITU-T |
Support |
64QAM/128QAM |
64QAM/128QAM/256QAM |
Digital average power |
30dBuV ~ 110dBuV |
precision |
+2dB |
Symbol rate |
1MS/S-7 MS/S |
Modulate error rate(MER) |
22dB ~ 39dB |
Bit error rate(BER) |
RS 1E-3~1E-9 |
Analog TV |
|
Frequency scope |
5~870MHz |
level |
20dBuV ~ 120dBuV |
precision |
+1.5dB |
Channel scan |
150 |
Spectrum / Frequency |
Bandwidth2.5MHZ can be se |
Other Functions |
Spect, Scan, Tilt, C/N, Voltage and so on |
Power supply |
|
battery |
7.2V/1500mAH rechargeable battery |
AC Supply: |
AC 90V-220V 50Hz-60Hz |
Working time |
6h |
Charging time |
3h | |