Fiber Polarization Maintaining(PM) PLC Splitter

Polarization Maintaining Planar Light wave Circuit (PLC) splitter is a type of polarization maintaining optical power management device that is fabricated using silica optical waveguide technology. PM PLC splitter maintains polarization of input optical signal. Polarization maintaining optical split

Specifications：

Fiber Polarization Maintaining(PM) PLC Splitter


Slow Axis with Plastic ABS Box Package

Polarization Maintaining Planar Light wave Circuit (PLC) splitter is a type of polarization
maintaining optical power management device that is fabricated using silica optical waveguide
technology. PM PLC splitter maintains polarization of input optical signal. Polarization m
aintaining optical splitter is an optical splitter in which the polarization of linearly
polarized light waves launched into the fiber is maintained during propagation, with little o
r no cross−coupling of optical power between the polarization modes.

SUNMA offers a large selection of polarization maintaining (PM) 1xN and 2xN optical splitter modules.
 PM splitters are supplied in configurations with 2, 4, 8 and 16 output channels. PM fibers are
bonded to the PLC circuit chips using precision multi-fiber alignment techniques. Our splitter modules
 feature low insertion loss, low polarization dependence and high polarization extinction ratio over
a wide wavelength range.


Features

  • Wide Band and Operating Temperature
  • High polarization extinction ratio
  • Good Splitting Uniformity
  • Low insertion loss
  • The length of pigtail: 1.0m as default(also customized)
  • The Axis: Slow Axis as default, Fast Axis is also available

    Applications

  • Splitting or Combining Output Power of Transmitters Using Polarization Maintaining Fiber
  • Excellent for laboratory and industrial applications
  • Aerospace and Military Application
  • Fiber Sensor
  • Fiber Laser
  • Test Bed

    Mechanical Drawing

    1x8: 100*80*10 mm

    Test Report

    The test report will be provided when the products are delivered.


    The test report is 1X16 just for reference
    Parameters Specifications Unit  Notes
    ChannelNumber 1×8 AccordwithRoHS
    OperationWavelength 1310 or 1550 nm
    InsertionLoss ≤11.1 dB
    Uniformity ≤0.8 dB
    PER ≥18 dB
    ReturnLoss ≥50 dB
    Directivity ≥55 dB
    FiberType Fujikura 1310nm or 1550nm PM fiber
    PigtailType Input: PM fiber with 0.9mm or 2.0mm or 3.0mm loose tube
    Output: PM fiber with 0.9mm or 2.0mm or 3.0mm loose tube
    InputLength ≥1.0 m
    OutputLength ≥1.0 m
    Connector FC/UPC
    FiberMark Input: white
    Output: blue/orange/green/brown/gray/white/red/black
    PackageDimension 100(L)×80(W)×10(H) mm
    OperationTemperature -40~+85 ℃
    StorageTemperature -40~+85 ℃