- Optical Network
- Fiber Equipment
- Fiber Optic Test
- Data & Telecom
- CATV & RF Signal
MPO is the high dense degree of optical fiber pre-connect system, which is generally use in three areas.The data centra application with high dense degree environment. The optical fiber to the building The internal connector application in fiber equipment such as Splitter, 40G /100G SFP and SFP+.Su
MPO is the high dense degree of optical fiber pre-connect system,which is generally use in three areas.
|MPO Male with Pins
|MPO Female without Pins|
Two other clearly visible features are the noses and guide grooves (keys) on the top side.
(Note: Female connector need to connect with male connector type.)
The three polarity methods Type A, Type B and Type C are used to guarantee the right bi-directional allocation.
MPO Trunk Fiber Patch Cables are terminated with MPO connector on both end.
1.The default diameter of the MPO cable is 3.0mm.
2.The default color of the single mode MPO connector is Blue.
3.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us
at firstname.lastname@example.org for other diameter standard.
4.Fiber-Mart can also custom the pulling eyes, welcome to contact us if you need.
|1||Our adopt industrys leading high-performance polishing machine, and complemented by precision |
plates holders designed for MT ferrules.
|2||The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, |
the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards.
|3||After the 3D interference detection, the flexibility of the tester provides the the complete spectrum |
of optical testing required for complex and high fiber count cable assemblies.
|Type||Single mode||Single mode||Multi mode|
|(APC polish)||(PC polish)||(PC polish)|
|Fiber count||8, 12, 24 etc.||8, 12, 24 etc.||8, 12, 24 etc.|
|Fiber type||G652D, G657A1 etc.||G652D, G657A1 etc.||OM1, OM2, OM3 etc.|
|Maximum Insertion Loss||Elite||Standard||Elite||Standard||Elite||Standard|
|Low Loss||Low Loss||Low Loss|
|≤0.35 dB||≤0.70 dB||≤0.35 dB||≤0.70 dB||≤0.35dB||≤0.60dB|
|Return Loss||≥55 dB||≥45 dB||≥20 dB|
|Durability||≥200 times||≥200 times||≥200 times|
|Operating Temperature||-10℃ ~ +70℃||-10℃ ~ +70℃||-10℃ ~ +70℃|
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
|Fiber Type||Cable Type||Fiber Count||Termination||Cable Length||Breakout Length (Inches)||Breakout Termination||Polarity||Lableing|
APC MPO Female
APC MPO Male
(36" is typical)
APC MPO Female
APC MPO Male