ST-3000 Series Fiber Crimping Machine

for the connector assembly and the ceramic ferrule and metal tailstock assembly of other products Crimp use air pressure of not less than 0.6~0.9Mpa. the maximum pressure 1000kgf by replacing the crimp tooling can be adapted to different parts assmply and crimping pressure adjustable to ada

Specifications：

ST-3000A One-Shot Crimping Machine



Specifications
1.  This machine is used for crimping aluminum ring during the manufacture of optical fiber patch cord. The work is done by one shot, steady and not easy to loose.
2.  The booster cylinder’s max pressure could reach 1 ton.
3.  The crimping mold is casted at one time. Heat treatment enables the hardness reach HRC63.
4.  It can also used for MPO, MTP, 7.0mm cable crimping.

Voltage: DC12V
Weight: 10Kg
Max. Pressure: 1000Kgs
Max. Air pressure: 0.8Kg

ST-3000B Pneumatic Ferrule Crimping Machine



for the connector assembly and the ceramic ferrule and metal tailstock assembly of other products Crimp
use air pressure of not less than 0.6~0.9Mpa. the maximum pressure 1000kgf
by replacing the crimp tooling can be adapted to different parts assmply and crimping
pressure adjustable to adapt to different products
simple, reliable and efficient processing
stable quality
maintenance,maintenance is simple and convenient
provide connector crimping dies, adapters and metal tailstock crimping dies
according to customer needs, customized different crimping tooling



ST-3000C Horizontal Pneumatic Crimping Machine

1.  For the connector assembly and the ceramic ferrule and metal  tailstock assembly of other 
    products Crimp.
2.  Use air pressure of not less than 0.6 ~ 0.9Mpa, the maximum pressure 1000kgf.
3.  By replacing the crimp tooling can be adapted to different parts assembly and crimping.
4.  Pressure adjustable to adapt to different products.
5.  Simple, reliable and efficient processing.
6.  Stable quality.
7.  Maintenance, maintenance is simple and convenient.
8.  Provide connector crimping dies, adapters and metal tailstock crimping dies.
9.  According to customer needs, customized different crimping tooling.

ST-3000E Electric Crimping Machine

1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly
     of other products crimp.
2.  By replacing the crimp tooling, can adapt to different parts assembly and the 
     crimping.
3.  Pressure can be adjusted to adapt to different products.
4.  Simple, reliable, high processing efficiency.
5.  Stable quality.
6.  Maintenance, simple and convenient.
7.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.
8.  According to customer needs, custom-made different crimping tooling.