ST-193 Ferrule Epoxy-Inject Machine

Plastic injection time: 0.001S 9.999S, 0.01S-99.99S (set by the switch on) Loop (break) time: 0.1S-9.9S Input pressure: 1bar-7bar (1bar = 1.01972kg/cm ?= 14.5038psi) Output pressure: 0.1 bar-7bar Repeatability: 0.00005S Minimum dispensing volume: 0.005ml Working speed:> 600 beats / min Input

Specifications：

ST-193 Ferrule Glue-Inject Machine


Plastic injection time: 0.001S 9.999S, 0.01S-99.99S (set by the switch on)
Loop (break) time: 0.1S-9.9S
Input pressure: 1bar-7bar (1bar = 1.01972kg/cm ?= 14.5038psi)
Output pressure: 0.1 bar-7bar
Repeatability: 0.00005S
Minimum dispensing volume: 0.005ml
Working speed:> 600 beats / min
Input voltage: 110V/220V ?10% 50Hz
Power consumption: <15W
Weight: <3.5Kg
Dimensions: 70 ?/SPAN> 210 ?/SPAN> 281 (mm)